How To Fix iPhone 7 Won’t Turn On Here’s Best Solution
The power issue was the most common problem with iPhone’s a few days ago we discussed the best guide to fix iPhone 6 black screen or won’t turn. However today we show the best solutions to fix Fix iPhone 7 black screen and Won’t Turn On.
We have taken our time to find the cause, and possible solution to iPhone 7 won’t boot problem. We have seen many users complaining in forums and blogs about this problem but am glad to tell you that the fix is here. Furthermore, if your iPhone 7 won’t turn on, it may be a glitch, a battery drain issue, or something not serious. In this guide, I will show you on how to troubleshoot your phone that resists turning back on.
You’re having a black screen because your iPhone 7 won’t turn on. The dilemma may be a minor software bug or a complex hardware issue. However, continue reading to see how to diagnose why your iPhone 7 isn’t turning on and how to fix the problem right now.
Best Troubleshooting Guideline To Fix iPhone 7 Won’t Turn On
If you’re experiencing iPhone 7 won’t turn on, your software may be crashing, which makes the screen of your iPhone 7 to turn black and also unresponsive. However, if the device underwent physical or liquid damage, you may require help from an Apple technician. Follow our best troubleshooting guideline and fix the cause of the problem with your iPhone 7.
1. Soft/Hard Reset Your iPhone 7
Sometime when your iPhone crashes without any reason, it leads to unresponsive of your device. User’s who have not experienced it before are always afraid when there is no to be. As a result of the glitch, they will take the phone to an Apple technician who will run hard reset and guess what the phone will boot within a short time.
Are you wondering why you should reset your iPhone 7? A hard reset is usually a quick solution to a software glitch. The good news is that the content on your device will not be touch. It will only forces your iPhone to restart. Here’s how to hard reset your iPhone 7 like a technician.
- Press and hold the Volume Down button and the Power key (sleep/wake button) concurrently for 15 to 20 seconds until the Apple logo will appear.
- Once the Apple logo shows up free the buttons
- Finally, your iPhone turns back on; the hard reset is complete.
Read Also: iPhone Hard Reset
In conclusion, you have just hard Reset your iPhone 7. Just make sure you follow the instructions above to do that, the phone will restart. However, if it’s still not unresponsive after that, then follow the next step below.
2. Ensure You Have Enough Battery that can Power on Your iPhone 7
Here’s the reason your phone wasn’t able to turn back on after it went off subsequent the hard reset is because you don’t have sufficient battery left on your phone. In this case, you don’t have any other option than to plug your phone in to charge for about 10 minutes.
Have you plugged your phone to charge? If you answered yes, then continue reading. If your iPhone 7 wasn’t able to detect the current flows via the circuits and remain unresponsive. As a result of that, your battery or another component is damaged. However, it might be a charging fault. Below is what you will do.
- Carefully check your cable for breakage.
- Check the port of your charger for lint, debris or corrosion that may be restricting the charging.
- Carefully Examine if pins to detect if one of them is bent.
- Get another charger to see if it will charge your phone.
- Lastly, examine the charging port of your iPhone 7 for rubble and corrosion
3. Examine Your Device for Physical and Liquid Damage
Well, your phone belongs to you we believe you know what might have happened to it. If your phone mistakenly fell on the ground or drop inside water. However, Even it has IP67 rating it may be suffering from physical or liquid damage.
Concerning the physical damage, you can check the casing to see if there is a dent or crack spotted on the outside. Furthermore, liquid damage becomes more complicated sometimes not mind how the phone dipped inside the water and started acting up. It can be the cause.
Read Also: How to Fix iPhone 7 No Service
The IP67 rating is an assurance that your device may not be hurt from liquid damage if got dropped in water for a short period. But in some cases, water or any other liquid substance is unpredictable, so there’s always a room for the device to suffer from liquid damage.
4. Meet Apple Technician Or Seek Support Techy Person
The guide above is what you need in troubleshooting your Fix iPhone to solve the iPhone 7 won’t turn on. Make sure you follow the three steps carefully. If the phone, however, refuses to turn on after that, then hand it over to Apple technician’s to fix the problem.
Here’s what you will do, go to Apple Store and consult the techy person in charge and wait for their recommendation. In this case, they may recommend a replacement if the problem is unrepairable especially if physical and liquid damage didn’t spoil the phone.
You can also call Apple hotline tech support for further troubleshooting but bear in mind that the problem isn’t related to app or software, but that your iPhone 7 is having a black screen and won’t turn on. You may be lost trying to do troubleshooting methods recommended by a techy person.
I believe the troubleshooting guide provided here can also help you troubleshoot a similar problem with your iPhone SE or any other iPhone. We suggest you should try to fix the problem on your own first before taking the phone for repair. To avoid staying for long without your phone and the cost of repair.
That’s all on this guide on How To Fix iPhone 7 Won’t Turn On If you have any question or suggestion make use of our comment box below.
Don’t forget o share this post with your friends and family via Twitter, Facebook and Google Plus.